Abrasion resistant sheet
Wear resistant sheet, hot rolled on strip mill mechanical properties are obtained during the rolling process. Thanks to the rolling process sheets have an excellent surface cleanliness.
|Thicknesses (mm)||Formats (mm)|
|3 - 8||1250 × 6000
1500 × 6000
Typical values (weight %).
|≤ 0.20||≤ 0.50||≤ 0.01||≤ 0.03||≤ 1.00||≤ 0.80||≤ 0.40||> 0.01|
Mechanical properties in delivery condition
|Thickness (mm)||Hardness (HB)||UTS (MPa)||YS (MPa)||E (%)|
* Average measured value. Guaranted hardness 340 - 440 HB.
In accordance with EN 10051 (December 1997).
All kind of flame cutting processes can be used.
In order to optimize this operation, a minimum temperature of 10 °C is requested.
|Internal minimum radius||V block opening minimum|
|Transversal||4 × th||14 × th|
|Longitudinal||5 × th||14 × th|
Minimum internal diameter 40 × th.
Hardness is obtained directly during the rolling process, thermo-mechanical rolling process. This type of process requests an addition alloy elements. Therefore the CEV value explains the strict necessity to fully respect the welding process. No preheating is required, nevertheless, in case of classical welding GMAW, the heat input must be managed correctly in order to avoid too much stress or distortion (Indicative Energy = 1.5 up to 2 kJ/mm).